Showing 289–304 of 474 resultsSorted by price: low to high
Soft Multi-Transmitter Bag – Surface For Surface Transmitters (UBB1029) FEATURES: – Stylish, durable, soft-shell, padded black vinyl bag with red highlights and Futaba logo. – Sturdy handles on both sides for easy transportation. – Sized to fit in any overhead airplane compartment. – High-quality zipper for secure and safe transmitter support. – Holds two Futaba…
BPS-1 – Backplate Sensor for Governor For use with GY701, CGY750, CGY760, and GV-1 Governors (UBC0085) The BPS-1 can only be used with a BPS-1 compatible engine backplate.
Futaba Reebok Playdry Polo Futaba-branded gray polo with orange embroidery. (PROPOLO19-M), (PROPOLO19-L), (PROPOLO19-XL), (PROPOLO19-2XL, (PROPOLO19-3XL) Reebok Playdry® polos. Soft to the touch and super comfortable, this shirt is made of 4.3-oz, 100% polyester. Moisture-wicking Playdry® technology wicks sweat away from the body to keep you feeling dry and looking fresh. Open hem sleeves keep your…
SBS-01RB: Brushless RPM Sensor Brushless RPM Sensor (UBB1138) USE: View the RPM of a Brushless motor on transmitter. RANGE: 360 ~ 300,000 RPM LENGTH: 475 mm 18.7 in WEIGHT: 3.8 g 0.134 oz VOLTAGE: DC 3.7 ~ 7.4V Manual available here.
Micro to Micro 12FG Trainer Cord Micro-Micro Trainer Cord for 12FG (MM-TC-FG) You can use this trainer cord when connecting two transmitter with a square “micro” trainer jack.
LBC-38DP– LiFeP04 Battery Charger Transmitter LiFePO4 Wall Charger (01102209-1) RECHARGEABLE BATTERY: LiFePO4 LiFe Battery/2 Cell INPUT: AC100V ~ AC240V – 50/60 Hz – 0.2 A Max OUTPUT: 7.2 VDC – 800 mA OPERATING TEMPERATURE: -10 ~ 40° C (0 ~ 30° C Recommended) COMPATIBLE BATTERIES (NOT INCLUDED): FT2F1700B (UBA0140) AND FT2F2100B (UBA0135)
R162JE– AM 27 MHz 2-Channel Air Receiver Small Size Light Weight with BEC (01102235-3) CHANNEL: 2ch AM SIZE: 28.6 mm x 42.9 mm x 15.3 mm 1.13 in x 1.69 in x 0.60 in WEIGHT: 14 g 0.49 oz
SBD-3 – S.Bus Decoder (01102361-1) SBD-3 is a converter for using conventional servo/ESC with the S.BUS system. SBD-3 can be used with S.Bus and S.Bus2; 3.5-8.4v. Preset to CH3 for throttle. Channel change device CIU-2/3 USB adapter (SBD-Link software for setting) T6K, T10J, T12K, T14SG (V4.0-)
