Showing 225–240 of 297 resultsSorted by price: low to high
Motor Controller PSC-15 Profile Series Electronic Speed Controller (PS-1500) – 15amp continuous current capability – Includes J connector for tight and secure connection to the receiver – XT30 style connector – 2mm motor connections
4PX/7PX Brake Lever – Small 15 mm Brake Trigger SS (Small) for Tx 4PX or 7PX (UBB1155) This aluminum throttle/brake lever is smaller than the width of the one provided with the transmitter (18 mm or 20 mm).
HBC-3B(4)-Wall Charger Class 2 Power Unit (01102208-1) INPUT: 120V – AC – 60 Hz – 5W OUTPUT: Tx: 6 VDC – 170 mA Rx: 6 VDC – 100 mA COMPATIBLE BATTERY (NOT INCLUDED): HT5F1800B (UBA0142)
4PX/7PX Brake Lever – Extra/Super Small 13 mm Brake Trigger SS (Super Small) for Tx 4PX or 7PX (UBB1156) This aluminum throttle/brake lever is smaller than the width of the one provided with the transmitter (18 mm or 20 mm).
Heavy Duty High-Power Switch Harness – ESW-1D Battery Side Deans Connector (UBA0324) DIMENSIONS (EXCLUDING PROTRUSIONS): 45.6 mm x 14.3 mm x 16.6 mm 1.80 in x 0.56 in x 0.65 in POWER REQUIREMENT: 3.7 V ~ 7.4 V VOLTAGE RANGE: 3.5 V ~ 8.4 V ALLOWABLE CURRENT: ~ 10A MAXIMUM ALLOWABLE CURRENT: 15A 30s…
Soft Multi-Transmitter Bag – Surface For Surface Transmitters (UBB1029) FEATURES: – Stylish, durable, soft-shell, padded black vinyl bag with red highlights and Futaba logo. – Sturdy handles on both sides for easy transportation. – Sized to fit in any overhead airplane compartment. – High-quality zipper for secure and safe transmitter support. – Holds two Futaba…
LBC-38DP– LiFeP04 Battery Charger Transmitter LiFePO4 Wall Charger (01102209-1) RECHARGEABLE BATTERY: LiFePO4 LiFe Battery/2 Cell INPUT: AC100V ~ AC240V – 50/60 Hz – 0.2 A Max OUTPUT: 7.2 VDC – 800 mA OPERATING TEMPERATURE: -10 ~ 40° C (0 ~ 30° C Recommended) COMPATIBLE BATTERIES (NOT INCLUDED): FT2F1700B (UBA0140) AND FT2F2100B (UBA0135)
BPS-1 – Backplate Sensor for Governor For use with GY701, CGY750, CGY760, and GV-1 Governors (UBC0085) The BPS-1 can only be used with a BPS-1 compatible engine backplate.
SBD-3 – S.Bus Decoder (01102361-1) SBD-3 is a converter for using conventional servo/ESC with the S.BUS system. SBD-3 can be used with S.Bus and S.Bus2; 3.5-8.4v. Preset to CH3 for throttle. Channel change device CIU-2/3 USB adapter (SBD-Link software for setting) T6K, T10J, T12K, T14SG (V4.0-)
No products in the cart.